• Install the SIM card
The slot for the SIM card is located on back
of your phone, beneath the battery. To
install the SIM card, be sure that the
phone is turned off, and perform the
following steps:
•
If the battery is already attached, see
“Remove the battery” on page 9.
•
If the battery isn’t attached, go to
step 1.
1
Insert the SIM card as shown, with the gold
contacts facing down.
Important! The beveled corner on the SIM
card must match up with the
beveled corner on the SIM slot.
2
Lock the SIM card into place by sliding
the card holder to the left.
SIM
Slot
SIM
card
SIM
slot
[ 8 ]
Install the battery
1
Align the battery with the slots on
back of the phone.
2
Gently slide the battery toward the
antenna until you hear a click.
Charge the battery
1
Plug the lead from the charger into the circular jack
on the end of your phone.
2
Plug the AC adapter into a standard wall outlet.
The phone beeps and the battery bar on screen
starts to scroll from bottom to top.
Note: If the battery is empty, it will take a moment
for the bar on screen to begin scrolling.
Tip: You can use the phone while it’s charging.
3
When the battery bar stops scrolling, the battery
is fully charged.
Note: Charging time depends on the charger and battery. For example,
charging time for the BLS-2N battery with the ACP-7U charger is
about 2 hours.
4
Disconnect the charger from the phone and unplug it from the wall
outlet once the battery is fully charged.
[ 9 ]
Before you begin
Remove the battery
Note: Switch the phone off before
removing the battery.
1
Press the release button on back
of the battery.
2
Push the battery toward the
bottom of the phone until it
stops.
3
Lift the battery to remove.